Quick Tips to Finding Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.
If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.
For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.